Holden Commodore (1993-1995) VR 3.8L V6 Clutch Kit

V388NHD

Product Description:

Clutch Direct are proud to offer PHC clutch upgrades for your 4x4. Increase the torque handling capability of your Clutch Direct upgraded 4x4. Perfect for tuned and enhanced 4x4's, or even those who just want to push the limits off-road.

Product Specification:

• Clutch Plate Dimensions: 255 x 10T x 29.0
• Dual Mass Flywheel: Not Included
• Solid Flywheel: Not Included
• Concentric Slave Cylinder: Not Included
• Torque Capacity: Peak: 585Nm, Recommended: 468Nm
• Flywheel Spec: Flat
• Spigot: RSB514
• Alignment: CAT186
• Length: 33.5
• Width: 33
• Height: 11

More Information

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

V388N

Product Description:

Clutch Direct are proud to offer PHC clutch upgrades for your 4x4. Increase the torque handling capability of your Clutch Direct upgraded 4x4. Perfect for tuned and enhanced 4x4's, or even those who just want to push the limits off-road.

Product Specification:

• Clutch Plate Dimensions: 255 x 10T x 29.0
• Dual Mass Flywheel: Not Included
• Solid Flywheel: Not Included
• Concentric Slave Cylinder: Not Included
• Torque Capacity:
• Flywheel Spec: Flat
• Spigot: RSB514
• Alignment: CAT186
• Length: 33.5
• Width: 33
• Height: 11

More Information

This kit includes : Cover assembly, Clutch plate, Release bearing

MS5-388-BX

Product Description:

Clutch Direct are proud to offer Mantic Performance clutch upgrades for your vehicle. Increase the power and toque handling capability of your performance car.

Perfect for your performance car, whether it’s a drift, drag, circuit or even performance focussed daily driver, Mantic clutch is the ideal choice for you, offering the best combination of quality, performance and cost.

Mantic – The high performance specialists

Achieve never-before-seen performance. Mantic Clutch is an Australian manufacturer of high-quality performance clutch kits helping drivers everywhere get the best from their vehicle. Whether you are lined up in a drag race competition or out for some Sunday off-roading, with our dedication to premium quality, eye for precision and affordable prices, we deliver twin disc, racing clutch kits that make your driving experience more meaningful and more exciting.

At our state-of-the-art manufacturing facility in Melbourne, Australia, Mantic Clutch designs, engineers and tests all race clutches in our aftermarket range, building them from the ground up to deal with the harshest road and competition conditions. We’ve made a name for ourselves both in our home country and around the world as a leading engineering firm, responsible for some of the most heavy duty, off-road clutch kits and the highest performance racing clutches on the market. If you’re looking for the missing piece for your vehicle that will help you get more from your car, find it in the Mantic Clutch aftermarket collection.

Mantic offer a variety of clutch compounds and configurations to suit your vehicle, racing from organic for your daily driver to sprung and metallic centers.

STAGE 5 RIGID Centre Undampened Cerametallic

Our most aggressive system in the single disc range, the Stage 5 clutch is designed exclusively for track/motor sport applications. The stage 5 kit offers a high torque capacity cover assembly with an SG iron burst proof pressure plate, combined with a rigid hub, undampened Cerametallic Clutch Dis

Product Specification:

• Clutch Plate Dimensions: 255 x 10T x 29.0
• Dual Mass Flywheel: Not Included
• Solid Flywheel: Not Included
• Concentric Slave Cylinder: Not Included
• Torque Capacity: Peak: 996Nm, Recommended: 797Nm
• Flywheel Spec: Flat
• Spigot: RSB514
• Alignment: CAT186
• Length: 40
• Width: 30
• Height: 15

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase. WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO

More Information

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic, No Cushion, Non Sprung (SC) Clutch Plate For Increased Torque capacity. Not for Daily Drive; Track Only., Release bearing , Clutch Alignment Tool, Spigot Bearing

MS4-388-BX

Product Description:

Clutch Direct are proud to offer Mantic Performance clutch upgrades for your vehicle. Increase the power and toque handling capability of your performance car.

Perfect for your performance car, whether it’s a drift, drag, circuit or even performance focussed daily driver, Mantic clutch is the ideal choice for you, offering the best combination of quality, performance and cost.

Mantic – The high performance specialists

Achieve never-before-seen performance. Mantic Clutch is an Australian manufacturer of high-quality performance clutch kits helping drivers everywhere get the best from their vehicle. Whether you are lined up in a drag race competition or out for some Sunday off-roading, with our dedication to premium quality, eye for precision and affordable prices, we deliver twin disc, racing clutch kits that make your driving experience more meaningful and more exciting.

At our state-of-the-art manufacturing facility in Melbourne, Australia, Mantic Clutch designs, engineers and tests all race clutches in our aftermarket range, building them from the ground up to deal with the harshest road and competition conditions. We’ve made a name for ourselves both in our home country and around the world as a leading engineering firm, responsible for some of the most heavy duty, off-road clutch kits and the highest performance racing clutches on the market. If you’re looking for the missing piece for your vehicle that will help you get more from your car, find it in the Mantic Clutch aftermarket collection.

Mantic offer a variety of clutch compounds and configurations to suit your vehicle, racing from organic for your daily driver to sprung and metallic centers.

Stage 4 - Sprung Centre Undampened Cerametallic

Able to handle more torque than either the stage 1, 2 or stage 3, this clutch is designed for nonstreet applications. A high torque capacity cover assembly with an SG iron burst proof pressure plate, combined with a sprung, non cushioned full cerametallic Clutch Disc, this reduces drivability, however does provide for quick engagement and very high torque capacity.

Product Specification:

• Clutch Plate Dimensions: 255 x 10T x 29.0
• Dual Mass Flywheel: Not Included
• Solid Flywheel: Not Included
• Concentric Slave Cylinder: Not Included
• Torque Capacity: Peak: 996Nm, Recommended: 797Nm
• Flywheel Spec: Flat
• Spigot: RSB514
• Alignment: CAT186
• Length: 40
• Width: 30
• Height: 15

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase. WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO

More Information

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic, No Cushion (SSC) Clutch Plate For Increased Torque capacity. Reduced Daily Driveability., Release bearing , Clutch Alignment Tool, Spigot Bearing

MS3-388-BX

Product Description:

Clutch Direct are proud to offer Mantic Performance clutch upgrades for your vehicle. Increase the power and toque handling capability of your performance car.

Perfect for your performance car, whether it’s a drift, drag, circuit or even performance focussed daily driver, Mantic clutch is the ideal choice for you, offering the best combination of quality, performance and cost.

Mantic – The high performance specialists

Achieve never-before-seen performance. Mantic Clutch is an Australian manufacturer of high-quality performance clutch kits helping drivers everywhere get the best from their vehicle. Whether you are lined up in a drag race competition or out for some Sunday off-roading, with our dedication to premium quality, eye for precision and affordable prices, we deliver twin disc, racing clutch kits that make your driving experience more meaningful and more exciting.

At our state-of-the-art manufacturing facility in Melbourne, Australia, Mantic Clutch designs, engineers and tests all race clutches in our aftermarket range, building them from the ground up to deal with the harshest road and competition conditions. We’ve made a name for ourselves both in our home country and around the world as a leading engineering firm, responsible for some of the most heavy duty, off-road clutch kits and the highest performance racing clutches on the market. If you’re looking for the missing piece for your vehicle that will help you get more from your car, find it in the Mantic Clutch aftermarket collection.

Mantic offer a variety of clutch compounds and configurations to suit your vehicle, racing from organic for your daily driver to sprung and metallic centers.

STAGE 3 - SprUng Centre Cushioned Cerametallic

Designed for performance street / track day use where a higher torque capacity is required, but the vehicle may still be used for everyday driving . The stage 3 kit offers a high torque capacity cover assembly with an SG iron burst proof pressure plate, combined with a sprung centre and cushioned cerametallic clutch disc to provide high torque capacity for those looking for maximum street performance and occasional track use.

Product Specification:

• Clutch Plate Dimensions: 255 x 10T x 29.0
• Dual Mass Flywheel: Not Included
• Solid Flywheel: Not Included
• Concentric Slave Cylinder: Not Included
• Torque Capacity: Peak: 996Nm, Recommended: 697Nm
• Flywheel Spec: Flat
• Spigot: RSB514
• Alignment: CAT186
• Length: 40
• Width: 30
• Height: 15

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase. WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO

More Information

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic (SSCC) Clutch Plate For Increased Torque capacity featuring High Performance Engineered and Manufactured Friction Material, Release bearing , Clutch Alignment Tool, Spigot Bearing

MS1-388-BX

Product Description:

Clutch Direct are proud to offer Mantic Performance clutch upgrades for your vehicle. Increase the power and toque handling capability of your performance car.

Perfect for your performance car, whether it’s a drift, drag, circuit or even performance focussed daily driver, Mantic clutch is the ideal choice for you, offering the best combination of quality, performance and cost.

Mantic – The high performance specialists

Achieve never-before-seen performance. Mantic Clutch is an Australian manufacturer of high-quality performance clutch kits helping drivers everywhere get the best from their vehicle. Whether you are lined up in a drag race competition or out for some Sunday off-roading, with our dedication to premium quality, eye for precision and affordable prices, we deliver twin disc, racing clutch kits that make your driving experience more meaningful and more exciting.

At our state-of-the-art manufacturing facility in Melbourne, Australia, Mantic Clutch designs, engineers and tests all race clutches in our aftermarket range, building them from the ground up to deal with the harshest road and competition conditions. We’ve made a name for ourselves both in our home country and around the world as a leading engineering firm, responsible for some of the most heavy duty, off-road clutch kits and the highest performance racing clutches on the market. If you’re looking for the missing piece for your vehicle that will help you get more from your car, find it in the Mantic Clutch aftermarket collection.

Mantic offer a variety of clutch compounds and configurations to suit your vehicle, racing from organic for your daily driver to sprung and metallic centers.

Stage 1 / ER2 organic

This clutch kit is specifically designed for the street performance market. The high torque capacity cover assembly’s pressure plate is manufactured from Spheroidal Graphite casting material, which has a yield strength 300% higher than standard castings. The materials microstructure also improves heat dispersion. In addition, the Mantic Stage 1 features our patented groove design, ER², CNC machined on the friction face of the pressure plate. Our stage 1 clutch system is capable of transmitting more torque than a standard clutch kit. This overall torque capacity increase has been achieved via higher clamp loads, increased Mean Effective Radius courtesy of the ER² designed pressure plate, improved heat displacement and use of a high coeffcient of friction organic material on the clutch disc. The clutch disc features organic facing material of both sides of the clutch disc making the stage one clutch system the most driver friendly option in our range.

Product Specification:

• Clutch Plate Dimensions: 255 x 10T x 29.0
• Dual Mass Flywheel: Not Included
• Solid Flywheel: Not Included
• Concentric Slave Cylinder: Not Included
• Torque Capacity: Peak: 645Nm, Recommended: 452Nm
• Flywheel Spec: Flat
• Spigot: RSB514
• Alignment: CAT186
• Length: 40
• Width: 30
• Height: 15

Mantic Stage 1, 2 and 3 Clutch Kits 1 year or 20,000 km (whichever occurs first) warranty from date of purchase. Mantic Stage 4, 5 and Track Series Kits (multi-plate) come with a 90 day satisfaction guarantee from date of purchase. WHICH HAVE BEEN MODIFIED TO EXCEED THE MAXIMUM ENGINE RPM(S) BEYOND THAT WHICH WAS SPECIFIED BY THE ORIGINAL VEHICLE MANUFACTURER WITHOUT FIRST INSTALLING APPROPRIATE SAFETY EQUIPMENT, INCLUDING BUT NOT LIMITED TO

More Information

This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing , Clutch Alignment Tool, Spigot Bearing